RUN
This article details my patch setup for the AU-CV September 2022 session. I will be demonstrating the Weston Precision Audio PAO (Phase Animated Oscillator) and the brand new SF1 (Stereo/Dual Filter). I am very proud to be doing this as Devin allowed me some input into the SF1 layout and feature scope. The SF1 was debuted at Knobcon 2022. The PAO was released in December 2020.
PAO - Phase Animated Oscillator
Demo Patch Summary
Five12 Vector Sequencer Part 3
- CV output (stackable) to PAO 1V/o and SF1 left channel 1V/o
- Gate Output to Roland 540 Envelope Generator EXT IN
Roland 540 Envelope Generator
- Output to Happy Nerding XFADE in linked mode
Happy Nerding XFADE
- running as a VCA with two linked channels
- Envelope input from Roland 540 to first channel, linked to second
- Outputs to MOTU interface
WPA Phase Animated Oscilator
- Left WAV output to Mordax C1
- Right WAV output to Mordax C2
- Phase animation modulated by Five12 QV-L prototype LFO3
- Optional additions - SYNC, LINEAR and EXPONENTIAL inputs from an Instruo CS-L
Mordax Data
- Channel 1 - WAV input from PAO left side / Output to SF1 left side Input
- Channel 2 - WAV input from PAO right side / Output to SF1 right side Input
- Channel 3 - WAV input from SF1 left side / Output to XFADE channel 1 Input
- Channel 4 - WAV input from SF2 right side/ Output to XFADE channel 2 Input
- This arrangement provides Mordax Data scopes for PRE and POST VCF audio of both channels
WPA Stereo Filter
- Inputs from PAO Left and Right WAV outputs
- Output L1 and R1 to Happy Nerding XFADE
- Optional Output L2 and R2 to demonstrate other shape modes
Five12 Quad Variable LFO Prototype
- LFO3 to PAO Phase Modulation
Instruo CS-L
- Used as an external VCO source to modulate PAO Sync, LIN and EXP Frequency Modulation
- Used with and without matched pitch 1V/o input